United States United States Change Country
Get to the Good Stuff on eBay



Ends in 3d 22h 21m 

217 Bought
Watcher count unavailable

Seller realrodder has 99.9% + feedback, 13983 total feedback on eBay

View realrodder's other items
Click thumbnail
to view image
in new tab.
HOT NEW ITEM---- EDMUNDS CUSTOM STROMBERG 97-48-81 choke bracket made by Charlie Price of Vintage Speed. This polished cast alum choke bracket is made from an original from the 50's that we own. A very rare Edmunds part, --originals almost never show up. Bracket bolts to rear body of your old original 97--48 --81's or any of the new reproduction carbs. and secures the choke cable in the proper location on the carb. Simply bolt on the bracket with the included screw, slip your choke cable housing into hole in bracket and tighten set screw, hook cable end to choke lever using our nifty quick connect end that snaps over your manual choke ball, tighten set screw to lock the cable end and --instant cool. This choke setup works real smooth and eliminates the need to change your choke lever to the cable style kit sold by others at twice the $ and requires complete disassembly of the base to install. You can install my choke kit in 5 minutes or less. It comes with the correct style set screw and the mounting hardware and mounting instructions. You need to use a solid wire choke cable. I have the proper choke cable listed that we use on our setups ---check our store under (Stromberg parts) or type in (361611249140) in the search. Add some real class to your fuel system. I also have one for the 3 bolt Holley 94 carbs---see our store. Note-- EDMUNDS and EDMUNDS CUSTOM are trademarks of --Charlie Price -Vintage Speed.. If this item is won with other items that specify shipping by USPS (mail), then this item can also be shipped via USPS. If this item is won with other items that specify UPS shipping, the all items will be shipped via UPS. NOTE --THIS BRACKET WILL FIT ON YOUR PRIMARY CARB ON DUAL OR TRIPLE CARB SETUPS EVEN IF THE CARBS ARE TOUCHING EACH OTHER. NOTE--- You can view an install video on this choke bracket on YOU TUBE. Type in CHARLIE PRICE VINTAGE SPEED in the search bar to view all of my videos. NOTE------LOOK!!!-----This bracket comes with the choke bracket---Screw to attach bracket to rear of your Stromberg----Snap on connector to attach to the choke cable (you supply cable) and it snaps over the choke lever ball on your carb. It comes with instructions also. It does not include the carb in the picture or the ball lever on your carb. If your carb already has a cable type choke lever you can use that in place of the ball snap we supply you. S-EDMUNDS choke bracket