United States United States Change Country
Get to the Good Stuff on eBay

Steampunk STEEL lamp pattern dxf format CNC file for PLASMA cutting on CD



Steampunk STEEL lamp pattern dxf format CNC file for PLASMA cutting on CD

$16.49
Ends in 17d 16h 

85 Bought
Watcher count unavailable

Seller fnfab has 100% + feedback, 3064 total feedback on eBay

View fnfab's other items
Click thumbnail
to view image
in new tab.
.dxf format artwork for CNC plasma cutting (or high power laser)Delivered on CD(See photo #2 for the layout sample) Drawn at full scale for maximum detail (high resolution).After payment, we'll provide a detailed parts list and assembly instructions. Uses common off-the-shelf parts.THIS LISTING IS FOR THE DXF FORMAT FILE ON CD. No parts are included. Photos of the finished item are for informational purposes only. Sample item pictured was made from 1/4 inch and 11 ga mild steel. Yes, it functions mechanically... turn the handle and the gears turn to adjust the position. Flip the giant lever to turn the lamp off and on (uses a standard wall switch hidden under the steel lever).For metric units: Scale according to photo #7 above. Replace the 1/4 inch steel with 6mm, replace the 11 gauge steel with 3mmMaterial required 1/4 inch: 46 in. x 18 in., 11 ga: 30 in. x 12 in.Finished lamp measures 23 inches high when lowered, 33 inches high when fully extended.We also offer other plans (files) for a very large steel floor lamp similar to this, see our eBay store.This is all original artwork created by Fred Nelson Fabrication and we legally own the content (sometimes called intellectual property). You are welcome to make and sell physical items from the digital files however, the files themselves are not intended for distribution or re-sale and may not be copied, duplicated, or transmitted in any way. Buyer agrees not to copy or distribute the electronic files.Feel free to contact us with questions. California residents add tax. Produced by Fred Nelson Fabrication. All rights reserved.