United States United States Change Country
Get to the Good Stuff on eBay

Knife Making Mosaic Screw System Pull Anchor Pair #PAP



Knife Making Mosaic Screw System Pull Anchor Pair #PAP

$3.80
Ends in 15d 5h 

1000 Bought
Watcher count unavailable

Seller premiumknifesupply.inc has 100% + feedback, 107091 total feedback on eBay

View premiumknifesupply.inc's other items
Click thumbnail
to view image
in new tab.
Pull tight handle anchor system. This is a great way of anchoring you handle material to the blade securely. You can use this system with out adhesive or epoxy if you choose. It's a simple countersink system where the round nut, 1/4" OD, is used with a screw to pull tight your handle. You first drill a pilot hole that is 11/64" and then a counter hole 1/4" above it with a depth of 1/8" to 1/4" depending on your handle. When you have done both sides of your knife pull the screws tight, cut the excess and/or sand flush the head and extra screw with your handle. The nut is made of brass and the screw is stainless (zinc and chrome) the contrast gives a mosaic pin look with greater strength than mosaic rods. Screw length is 1 1/2". What you will receive is a pair of screws with four 1/4" OD nuts. Sold in pairs.