United States United States Change Country
Get to the Good Stuff on eBay

Auto Range In Circuit ESR Capacitor Meter Tester Up to 0.001 to 100R MESR100 US



Auto Range In Circuit ESR Capacitor Meter Tester Up to 0.001 to 100R MESR100 US

$69.00
Ends in 16d 14h 

141 Bought
Watcher count unavailable

Seller lapsun_kit has 98.8% + feedback, 9796 total feedback on eBay

View lapsun_kit's other items
Click thumbnail
to view image
in new tab.
MESR100 AutoRanging In Circuit ESR Capacitor Meter Tester Up to 0.001 to 100R with 2 pairs Probes Features: JINGYAN MESR-100 V2 Auto-ranging capacitor ESR and Low Ohm Meter, measuring range from 0.001 to 100.0R, support IN CIRCUIT Testing. Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer. In the market, there is some technique using short pulse method to testing, but the value will be varying vs the capacitance and sometimes reading is different from the manufacturer's value What is ESR of capacitor? There is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C), the impedance become small, and we can then measure the true series resistor value. A bad E-capacitor will have larger ESR and create large ripple rather than filtering noise. Normally, a big capacitor is larger than 3 ohm. Using this theory, we can measure the capacitor is bad/ damaged or good in condition. Because our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test. Because this low testing voltage, it cannot turn on the semiconductor inside a circuit under testing. During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not. *Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check Specification: Range Accuracy (After Zero, tested with 1,10,100R resistor) Refresh Time (Manual Mode)*Auto mode take 0 to 2s more time depend on value 0.000 to 1.000R 1%+2Digit ~0.4s 1.000 to 10.00R 1%+1Digit ~0.4s 10.00 to 100.0R 2%+1Digit ~0.4s *Accuracy maybe affected by the test lead length and contact point resistance. Standard test leads is 15cm, for longer test leads need special shielding to affect the EMI inference (Can contact sales person for more detail) 1) Accuracy: Up to 1% (detail on above table) Wide Measurement Range: >1uF (for 0.1uF the error will be larger on equation 1/(2*pi*F*C) @ 100Khz ) 2) High Resolution: 4 digit, or 0.001Ohm @ 1 Ohm range 3) Measuring voltage: <~40mV RMS (TESTING VOLTAGE) 4) Clamping voltage: ~0.15V (open voltage) 5) Battery: 2X AA 1.5V battery (not include in the packing) 6) External Power: 5V micro USB 7) Operating current 0.02A 8) Battery Life time: >80 Hours Package Content: 1 x MESR-100 1 Pair test probe 1 Pair Test Clip Probe Shipping Payment Return Policy Shipping The price has not include the tax, but usually we write lower value on the INVOICE to avoid your customs tax. All items will be arranged shipping within 24-48 hours upon your payment cleared All items will be shipped to buyer's PAYPAL address, please check your address, if you want to change the address, please send us by email after you pay the item Please contact us and check the item in your local post office if you still have not received the item 30 days after payment Below is the shipping time by post airmail for your reference: Shipping Payment Return Policy Payment We ONLY accept PayPal. If you would like to choose other payment methods, please contact with us first.. Non-paying bidders will be reported to ebay and leave negative feedback after auction ended 7 days. Please contact us as soon as possible if you have problem in making payment. We appreciate prompt payment and look forward to your business in the future. Our shipping charge has been including handling fee, labor fee and other charge. Paypal account: lapsuntechgmailcom Shipping Payment Return Policy Return Policy We provide 1 year quality guarantee since you purchased our item We would like to assure the all products can be arrived on time and in good condtion, but some quality problem caused by such as manufacture, material or bad quality under normal use, also damage goods during the shipping will be returned or refund, but a picture is necessary to proof the demage. Non-Defective Merchandise (20% restocking fee will be charged) - within 14 days of receipt If you would like to return your product(s) for repair / replacement / refund, please kindly contact us via email. Buyers are responsible for the returning shipping costs under any circumstances. Engineered for professional eBay sellers´╝ü